Safe-D® D-Fixings

D-Fixings are fire-rated screws having close threads that provide exceptional performance. D-Fixings are ideal for securing D-Line fire-rated Safe-D ranges
(& other electrical installation equipment) in popular substrates - including
masonry, (stone, brickwork, breeze-block, concrete) plasterboard and wood.

D-Fixings have been extensively tested, and are certified to hold Safe-D clips
and cable loads up to 970°C for 2 hours, after withstanding stress vibrations
and water sprays also.

In fire tests the D-Fixing threads remain securely embedded with
no need for anchors or plastic wall plugs (which typically melt at 160°C).

A counter-sunk and a pan-head option is available.

Dimensions - Pan Head

35mm (L) x 10.8mm head width (W1) x 5.5mm thread width (W2)

Produced from C1022 hardened steel
PZ3 Head
Fits 5mm pilot hole in brick (may vary for different substrates)
No need for plastic wall plugs
Excellent tensile strength, shear strength and pull-out load performance
>1200°C melting point
1000 hour salt spray tested

Dimensions - Countersunk

40mm (L) x 8.3mm head width (W1) x 5.1mm thread width (W2)

D-Fixings are produced from hardened steel DIN standard 10666
Fits 4mm pilot hole in brick (may vary for different substrates)
3mm stand-off above base
The shallow head optimizes the space remaining for cables
No need for plastic wall plugs
Excellent tensile strength, shear strength and pull-out load performance
>1200°C melting point

Trade Brochure

Download Datasheets

Alternative Products

U-Clips

F-Clips

Conduit Saddles

Adjustable Clips

EV Cable Fixing Packs

Stag Clips

T&E Grip Clips

Spring Clip

Retro Clips

Steel Cable Ties

Drill Bits

To provide assurance and peace of mind, all D-Line Safe-D® products have been certified by Exova Warringtonfire.
Tests confirmed that all products can hold cables secure in temperatures of 930ºC (+40 -0ºC) for 2 hours. Safe-D®
products also withstand required levels of shock, vibration and water spray. Copies of reports are available on request.